Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 48k BTU Coil 80Pct Furnace 070 MBH 14.5 SEER2 V1
Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 48k BTU Coil 80Pct Furnace 070 MBH 14.5 SEER2 V1
Kit Includes Copper Fittings/Adapters, PVC Ptrap Kit, BIP Gas Cock, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, No Vent Caps, Furnace Leveler, 2" Plastic Pad, 2H/2C Thermostat
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 48k BTU Coil 80Pct Furnace 070 MBH 14.5 SEER2 V1
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Not Energy Star Compliant
- Heating Input (BTUH):
- 070 MBH Heat
- Includes:
- H4A7T48AKAWA, N80VSL0702120A, EAM4X48L21A, ACGKIT10
- Nominal Capacity (BTUH):
- 48000
- Cooling Efficiency (EER2):
- 11.5
- Cooling Efficiency (SEER2):
- 14.5
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Multi Stage
- System Coil Configuration:
- Multi Position "A" Coil
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 4
- AHRI System Number:
- 210699623
A/C, Single Phase, Split Gas Furnace Multi Stage, Multi Position "A" Coil H4A7T/N80VSL/EAM4X
Air Conditioner Condenser
- 2 Stage Copeland Scroll Ultratech Compressor
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Filter Drier Supplied for Field Installation
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
- Hi efficiency VCT Variable Speed Constant Torque Motor
- Dehumidification Feature
- Supports Single & 2 Stage Cooling
- Insulated Blower Compartment
- Four position - up flow/down flow/horizontal installation
- 33-1/3” (847mm) high
- Electronic Air Cleaner & Humidifier terminals
- Factory shipped for natural gas, LP conversion kits available
- Category I venting (Common venting with other Category I appliances)
- Three position inducer elbow capability
- Masonry chimney adapter available
- Through the casing flue pipe for counter flow applications RELIABLE
- RPJ Aluminized steel heat exchanger
- In-shot burners
- Direct ignition on with Silicon Nitride igniter
- Innovative knobs for easy door removal and secure attachment
- Self diagnostics
- Corrosion resistant aluminum tube
- Bolt-on TXV metering device factory installed on all models (equalizer tube brazed in)
- TXV and manifold positioned to the side for easier cleaning
- Innovative drain pan design for complete water removal
- Two condensate drain connections (Additional two for horizontal installation)
- 2-piece delta plate for easier removal and cleaning
- Cabinet widths match flush with Arcoaire gas furnaces
- Hemmed flanges for safer handling
- Foil faced insulation
- Non-sweat cabinet, even at extreme conditions
- Cabinets meet or exceed 2% air leakage codes
- Sturdy, 22 gauge, pre-painted steel cabinet
- One or two UV light knock-outs provided on cabinet (depending on size)
